Air Compressor

Approx. Rs 2.39 Lakh / PieceGet Latest Price

Approx. Rs 5 Lakh / PieceGet Latest Price

Approx. Rs 2.35 Lakh / PieceGet Latest Price

Approx. Rs 3 Lakh / PieceGet Latest Price

• Screw Type, Oil-Injected Air-End, with most modern Asymmetric high efficiency rotor profile, massive bearing construction, ensuring reliable continuous operation up to 14 brag pressure
• Electric Motor Standard Metric Frame, Three-phase, class F Insulation, 400V 50 Hz, IP 23 Drip proof enclosure, (TEFV IP 54 is standard up to 15 HP)
• Star Delta type with overload protection, delay relays, control circuit fuse, fan motor starter (above 20 HP), mushroom type emergency stop
• Air oil cooler, cooling the compressed air about 10°C above ambient
• Dry type Microns air filter with cleanable and replacement element
• Lubrication system, complete with air-cooled oil cooler (suitable for ambient temperature of up to 45°C) Air oil Reservoir, oil filter, Safety Valve, oil Level Gauge, interconnecting piping, Thermostatic mixing valve enabling stable operating temperatures
• Fine Air-oil Separator, 2 stage ensuring 1 to 3 PPM oil carry over by weight
• Control panel,IP54 enclosure including pressure gauge, Temperature Gauge, filter service indicator, Hour-Meter, Fault indicating lamp, start/stop/Reset switches
• Acoustic canopy for the reduction of the noise level down to 76 to 82 dBa

• Medium pressure 5 to 13 Barg
• Low Pressure 3 to 5 Barg for pneumatic and process applications

• IP 23 or IP 54/55 enclosures
• Explosion – Proof enclosures, Nema Frame Motors
• Customer supplied Motor Drives
• Variable – Speed – Motors

• Full Voltage starters
• Star-Delta Starters
• Soft Starters, Digital or analogue type & Auxiliary by-pass contractors
• Main disconnect Switch
• Short- Circuit Breakers
• Vacuum Switch Contractors

• Air Cooled
• Air Cooled For extreme high – ambient temperatures

• Combined Capacity Control (Upper Range Modulation) down to partial capacities of 50% (adjustable). When air demand is further reduced the Control switches automatically to unloaded operation with Low power consumption-and automatic timed- stop and Auto - start on renewal of air demand. This system ensures stable control with reduced dependence on air receivers and relative Power Saving during periods of low air Demand
• Power saving ‘’TURN-VALVE” Control, Step less proportional capacity control at stable discharge pressures with minimum power consumption at part load, independent of receiver volumes. The simplest and most efficient Capacity Control in rotary Air Compressors from 100% down to 0% flows, for plants having large fluctuations in compressed air demand
• Variable Speed Capacity Control

Additional Information:

• Delivery Time: 1 to 2 weeks

Approx. Rs 35,000 / PieceGet Latest Price

Approx. Rs 5.56 Lakh / PieceGet Latest Price

• How often the compressor is used and how it is used.
• Short list in-plant compressed air application. Make a list of equipment in the plant Consuming compressed air and expected air flow requirement in ‘CFM’ and the required pressure in ‘PSI’
• Consider the duty cycle of your compressors as most compressors are not meant to run all the time.
• Decide on the size/capacity of the tank. The more use of equipments means the need for larger tank. Choosing a larger tank than the need will ensure optimum use of the Compressor.
• Consider 10% more capacity compressor to compensate the air misuse or leaks and pressure drop in the system.
• Decide on the continuous run style or start-stop style compressor. ( A compressor that runs continuously, but only compresses air as per demand or a compressor that fills the tank and stops until low pressure signals a start).
• Consider the accessory which is to be installed with each compressor.
• Other like maintenance, life expectancy, trouble shooting (also know the manufacture network/ regional offices), repair costs, etc.

• Bare compressor
• Air Suction Filter
• Air Receiver
• Receiver Fittings like: Safety Valve, Pressure Gauge, Service Valve, Drain Valve, Pressure Switch / Auxiliary Valve
• ASSC / CSC Regulation
• V-belts & Belt Guard
• Motor Pulley & Motor Slide Rail
• Motor & Starter

• Receiver – vertical or loose supply
• Drive : Motor or Engine
• Pre filter & After filter : For oil removal purpose
• Air Dryer : For dry or moisture free air – Refrigerated; Heatless Air Dryer
• Air Dryer : Condensate Drain Trap : Automatic Type
• Low Oil Level Switch
• Sound Enclosures : For low noise
• Control Panel – for centralized control & display of parameters
• Compressor also available as : Base Plate Mounted – Portable, Tailor- made package

Approx. Rs 50,000 / PieceGet Latest Price

Additional Information:

• Delivery Time: 1-2 weeks

Approx. Rs 36,135 / PieceGet Latest Price