Air Compressors

Approx. Rs 1.5 Lakh / UnitGet Latest Price

• Sealed and high temperature resistant pre-lubricated bearings.
• Well designed cooling system of air cooled inter/after coolers.
• special material piston ring which retains its properties under high temperature working conditions.
• Piston ring outer surface always in contact with the cylinder bore even after thousands of hours of running and corresponding wear ensuring unchanged pumping up time.
• Special material piston ensures the retention of cylinder bore finish in adverse temperature condition and expansion of piston.

Approx. Rs 50,000 / UnitGet Latest Price

• How often the compressor is used and how it is used.
• Short list in-plant compressed air application. Make a list of equipment in the plant Consuming compressed air and expected air flow requirement in ‘CFM’ and the required pressure in ‘PSI’
• Consider the duty cycle of your compressors as most compressors are not meant to run all the time.
• Decide on the size/capacity of the tank. The more use of equipments means the need for larger tank. Choosing a larger tank than the need will ensure optimum use of the Compressor.
• Consider 10% more capacity compressor to compensate the air misuse or leaks and pressure drop in the system.
• Decide on the continuous run style or start-stop style compressor. ( A compressor that runs continuously, but only compresses air as per demand or a compressor that fills the tank and stops until low pressure signals a start).
• Consider the accessory which is to be installed with each compressor.
• Other like maintenance, life expectancy, trouble shooting (also know the manufacture network/ regional offices), repair costs, etc.

Approx. Rs 50,000 / PieceGet Latest Price

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Main part of Screw Compressor is Air-end, consisting of a pair of rotors. The male motor is driven by electric motor. Suction of air though Inlet filter and suction control valve. Air – oil mixture from air-end flows into an air – oil separator. The separated oil flows through oil filter and after cooling in 'cooler', it gets back into the system. The air also passes through air cooler and to the receiver. The whole system is controlled through valves / sequence of compressor is done through electric /electronic control.

Approx. Rs 50,000 / PieceGet Latest Price

Approx. Rs 1.5 Lakh / PieceGet Latest Price

ELGi’s EG series rotary screw air compressors represent a giant leap in design and performance, with every single component designed for reliability and ease of maintenance. In addition, each rotary screw air compressor is designed and manufactured in compliance with applicable international standards (CE, ASME, UL, and others). The EG series rotary screw air compressors offer the lowest oil carryover in the industry. Their ability to perform at extreme temperatures makes them suitable for various industries.

Approx. Rs 7 Lakh / PieceGet Latest Price

Additional Information:

• Delivery Time: 1 to 2 weeks

Approx. Rs 2.5 Lakh / UnitGet Latest Price

Approx. Rs 40,000 / PieceGet Latest Price

Approx. Rs 30,000 / PieceGet Latest Price

Approx. Rs 2 Lakh / PieceGet Latest Price

Approx. Rs 8.5 Lakh / PieceGet Latest Price

Approx. Rs 40,000 / PieceGet Latest Price

Approx. Rs 30,000 / PieceGet Latest Price

Approx. Rs 30,000 / PieceGet Latest Price

Approx. Rs 60,000 / PieceGet Latest Price

Approx. Rs 80,000 / PieceGet Latest Price

INDO-AIR Multi-stage, High Pressure Air Compressors are available in two & three stages in two cylinder & three cylinder versions. Robust, overhung design crankshaft for reliability and easy maintenance, solid end connecting rods, highly thermal efficient inter cooling, totally reliable splash lubrication and balanced V-type construction for smooth vibration-free operation. Cross head cylinders are used in case of the last stage small diameter piston for better support and to accommodate adequate Con Rod bushing.

Approx. Rs 75,000 / PieceGet Latest Price

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Approx. Rs 1.99 Lakh / PieceGet Latest Price

Approx. Rs 1.02 Lakh / PieceGet Latest Price

Approx. Rs 70,200 / PieceGet Latest Price

Additional Information:

• Delivery Time: 1-2 weeks

Approx. Rs 4 Lakh / PieceGet Latest Price

• How often the compressor is used and how it is used.
• Short list in-plant compressed air application. Make a list of equipment in the plant Consuming compressed air and expected air flow requirement in ‘CFM’ and the required pressure in ‘PSI’
• Consider the duty cycle of your compressors as most compressors are not meant to run all the time.
• Decide on the size/capacity of the tank. The more use of equipments means the need for larger tank. Choosing a larger tank than the need will ensure optimum use of the Compressor.
• Consider 10% more capacity compressor to compensate the air misuse or leaks and pressure drop in the system.
• Decide on the continuous run style or start-stop style compressor. ( A compressor that runs continuously, but only compresses air as per demand or a compressor that fills the tank and stops until low pressure signals a start).
• Consider the accessory which is to be installed with each compressor.
• Other like maintenance, life expectancy, trouble shooting (also know the manufacture network/ regional offices), repair costs, etc.

• Bare compressor
• Air Suction Filter
• Air Receiver
• Receiver Fittings like: Safety Valve, Pressure Gauge, Service Valve, Drain Valve, Pressure Switch / Auxiliary Valve
• ASSC / CSC Regulation
• V-belts & Belt Guard
• Motor Pulley & Motor Slide Rail
• Motor & Starter

• Receiver – vertical or loose supply
• Drive : Motor or Engine
• Pre filter & After filter : For oil removal purpose
• Air Dryer : For dry or moisture free air – Refrigerated; Heatless Air Dryer
• Air Dryer : Condensate Drain Trap : Automatic Type
• Low Oil Level Switch
• Sound Enclosures : For low noise
• Control Panel – for centralized control & display of parameters
• Compressor also available as : Base Plate Mounted – Portable, Tailor- made package

Additional Information:

• Delivery Time: 1 to 2 weeks

Approx. Rs 75,000 / PieceGet Latest Price

Main part of Screw Compressor is Air-end, consisting of a pair of rotors. The male motor is driven by electric motor. Suction of air though Inlet filter and suction control valve. Air – oil mixture from air-end flows into an air – oil separator. The separated oil flows through oil filter and after cooling in 'cooler', it gets back into the system. The air also passes through air cooler and to the receiver. The whole system is controlled through valves / sequence of compressor is done through electric /electronic control.

Approx. Rs 2.3 Lakh / PieceGet Latest Price

Approx. Rs 50,000 / UnitGet Latest Price

• 3HP-30HP multi stage
• 1HP-20Hp Single Stage

Approx. Rs 5.5 Lakh / PieceGet Latest Price

Approx. Rs 60,000 / UnitGet Latest Price

• Quality products ably supported by quality service: At Chicago Pneumatic, it is our constant endeavour to provide you with the best equipment and service solutions. Our compressors are supported by a network of trained service support and ensure spare parts availability. They are available for any technical consultation to optimize the performance of your equipment and ensure reliable operation. With a wide network spread accross the country, we are never too far away, to help you solve your problems. Anytime, Anywhere.
• Spare Parts: Multiple types of service kits are available for all models, as well as single spare parts. This helps to properly plan maintenance saving time and money. 

Approx. Rs 8 Lakh / PieceGet Latest Price

Approx. Rs 65,000 / PieceGet Latest Price

Additional Information:

• Delivery Time: 2-3week

Approx. Rs 50,000 / PieceGet Latest Price

• How often the compressor is used and how it is used.
• Short list in-plant compressed air application. Make a list of equipment in the plant Consuming compressed air and expected air flow requirement in ‘CFM’ and the required pressure in ‘PSI’
• Consider the duty cycle of your compressors as most compressors are not meant to run all the time.
• Decide on the size/capacity of the tank. The more use of equipments means the need for larger tank. Choosing a larger tank than the need will ensure optimum use of the Compressor.
• Consider 10% more capacity compressor to compensate the air misuse or leaks and pressure drop in the system.
• Decide on the continuous run style or start-stop style compressor. ( A compressor that runs continuously, but only compresses air as per demand or a compressor that fills the tank and stops until low pressure signals a start).
• Consider the accessory which is to be installed with each compressor.
• Other like maintenance, life expectancy, trouble shooting (also know the manufacture network/ regional offices), repair costs, etc.

• Bare compressor
• Air Suction Filter
• Air Receiver
• Receiver Fittings like: Safety Valve, Pressure Gauge, Service Valve, Drain Valve, Pressure Switch / Auxiliary Valve
• ASSC / CSC Regulation
• V-belts & Belt Guard
• Motor Pulley & Motor Slide Rail
• Motor & Starter

• Receiver – vertical or loose supply
• Drive : Motor or Engine
• Pre filter & After filter : For oil removal purpose
• Air Dryer : For dry or moisture free air – Refrigerated; Heatless Air Dryer
• Air Dryer : Condensate Drain Trap : Automatic Type
• Low Oil Level Switch
• Sound Enclosures : For low noise
• Control Panel – for centralized control & display of parameters
• Compressor also available as : Base Plate Mounted – Portable, Tailor- made package